ISO 27721
Countersunk head screws. Head configuration and gauging - ISO 7721
ISO 7721
Countersunk head screws. Head configuration and gauging
ISO 4759-3
Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C
ISO 7721-2
Countersunk flat head screws - Part 2: Penetration depth of cross recesses
ISO 16048
Passivation of corrosion-resistant stainless-steel fasteners
DIN EN 28839
Mechanical properties of fasteners - bolts and nuts made of non-ferrous metal
ISO 1478
Tapping screws thread
ISO 10666
Drilling screws with tapping screw thread -- Mechanical and functional properties
ISO 2702
Heat-treated steel tapping screws -- Mechanical properties
ISO 3506-4
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws
ISO 3506-3
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress
ISO 3506-2
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts
ISO 3506-1
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
ISO 10684
秘密研究所 - Hot dip galvanized coatings
ISO 10683
秘密研究所 - Non-electrolytically applied zinc flake coatings
ISO 4042
秘密研究所 - Electroplated coatings
ISO 6157-2
秘密研究所 - Surface discontinuities - Part 2: Nuts
ISO 7378
秘密研究所 - Bolts, screws and studs - Split pin holes and wire holes
ISO 4755
Cast carbon steels for general engineering purposes
ISO 3508
Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
ISO 888
秘密研究所 - Bolts, screws and studs - Nominal lengths and thread lengths
ISO 885
General purpose bolts and screws - Metric series - Radii under the head
ISO 4753
秘密研究所 - Ends of parts with external ISO metric thread
ISO 10664
Hexalobular internal driving feature for bolts and screws
ISO 4757
Cross recesses for screws
ISO 272
秘密研究所 - Hexagon products - Widths across flats
ISO 965-5
ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO 965-4
ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO 965-3
ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads
ISO 965-2
ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
ISO 965-1
ISO general purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data
ISO 2320
Prevailing torque type steel nuts -- Mechanical and performance properties
ISO 898-7
Mechanical properties of fasteners -- Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
ISO 898-6
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 6: Nuts with specified proof load values - Fine pitch thread (ISO/DIS 898-6:2010)
ISO 898-5
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners with specified hardness classes -- Coarse thread and fine pitch thread
ISO 898-2
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 2: Nuts with specified property classes -- Coarse thread and fine pitch thread
ISO 898-1
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread
ISO 4759-1
Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
ISO 8992
秘密研究所 -- General requirements for bolts, screws, studs and nuts